400ex Push Button
Starter
Unplug and remove wiring harness
for the headlights.

Unplug and remove wiring harness
for the neutral light.

Cover the exposed wiring
connector with a piece of heat sink.

Unplug and remove wiring harness
and main control switches from the handlebars.

Rap a layer of tape around the
area on the bars that the aftermarket switch will be mounted.

Mount the switch to the bar and
attach a second wire to the collar of the mounting ring.

Connect the main wire of the
switch to the yellow with orange stripe wire in the main wiring harness.
Connect the second collar wire to the black wire in the main wiring
harness.

Secure all wires.

No cuts to any wires is needed.
Place extra wiring harnesses away for a later date.

These are pictures from before we
started.

|